User Manual Q&AAnswer
Feb 17, 2025 - 01:41 AM
To configure the display unit for pressure on the BD SENSORS Precision Pressure Transmitters, follow these steps:
1. Unscrew the metal cap on the display and operating module by hand.
2. Use the ▲ and ▼ buttons to navigate to menu 4 SETTINGS.
3. Select menu item 4.1 DISPLAY to configure the display unit.
4. Use the ▲ and ▼ buttons to select the desired unit for pressure. Options include bar, mbar, g/cm², kg/cm², Pa, kPa, Torr, atm, mH2O, ftH2O, MPa, mFH*, cmFH*, mmFH*, mmH2O, mmHg, and psi.
5. Confirm the selected unit by pressing the OK button.
6. xxxx the metal cap back on by hand, ensuring that the housing is firmly locked.
Please refer to the instruction manual for more detailed information and illustrations on configuring the display unit for pressure.
Add New Comment