User Manual Q&AAnswer
Feb 17, 2025 - 01:33 AM
Installation of the Hisonic PS01 Portable Stage is a simple process that can be completed by following the provided instructions. Here is a step-by-step guide on how to install the stage:
1. Accessory Check: Before starting the installation, ensure that you have all the necessary accessories. These typically include the stage legs, stage panels, and connectors.
2. Stage Leg Setup: Open the stage legs by unlocking them and extending them to the desired height. Make sure all legs are securely locked in place to ensure stability.
3. Stage Panel Installation: Take the stage panels and align them with the stage legs. The panels should have pre-drilled holes that match the connectors on the legs. Insert the connectors into the corresponding holes on the panels and push them in until they are securely connected.
4. Connecting Multiple Stages: If you are using multiple stages, you will need to connect them together. To do this, align the connectors on one stage with the connectors on the adjacent stage. Insert the connectors and push them in until they are securely connected.
5. Stability Check: Once all the panels and stages are connected, check the stability of the stage. Ensure that all legs are securely locked in place and that the stage does not wobble or move when pressure is applied.
It is important to note that the specific installation process may vary slightly depending on the model of the Hisonic PS01 Portable Stage. For more detailed instructions and diagrams, refer to the installation guide provided with the product.
Add New Comment