User Manual Q&AAnswer
Feb 17, 2025 - 01:09 AM
To install the blower tube on the RYOBI RY404013 40 Volt Brushless Blower, follow these steps:
1. With the tab facing down, slide the blower tube over the outlet on the blower housing.
2. Push the blower tube onto the blower housing outlet until the tab locks into place through the notch in the blower housing.
3. To remove the tube, depress the tab and slide the tube off.
Note: When correctly assembled, the tube is difficult to separate. If it can easily be pulled apart, the tube is not locked. Check that the tab is aligned, and push the blower tube onto the blower housing until the tube snaps into the locked position. If the tube is not in the locked position, it can separate during blower operation.
Additionally, the RYOBI RY404013 40 Volt Brushless Blower comes with a speed tip that can be installed on the blower tube. To install the speed tip, align the tab on the speed tip with the notch on the blower tube and press together until the tab locks into place. To remove the speed tip, depress the tab and slide the speed tip off.
For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment