How do I install the Media Hub options for the Media Hubs M Class Mark II Industrial Printer? (Media Hubs M Class Mark II Industrial Printer User Guide)

Answer

manuals.plus

Feb 17, 2025 - 01:03 AM

To install the Media Hub options for the Media Hubs M Class Mark II Industrial Printer, follow these steps:

1. Turn OFF the Power Switch and unplug the power cord from the AC Receptacle. Disconnect the interface cable(s).
2. Remove the Cover Screws on the outside of the printer and raise the Cover.
3. Loosen the Cover Screws on the Centerplate and remove the Cover.
4. Disconnect the cables from the Main Logic Card. Remove the Screws that secure the Main Logic Card and the Fill Plate to the Card Cage. Remove the Fill Plate then slide the Main Logic Card out of the printer.
5. Remove the Hanger Screws that secure the Media Hanger to the Centerplate and then remove the Media Hanger.
6. Slide the Main Logic Card into the Card Cage and replace the Fill Plate. Secure the Main Logic Card and the Fill Plate using the previously removed Screws.
7. Reconnect all the cables to the Main Logic Card. Remove the Ground Strap xxxx and Lock Washer, four Power Supply Screws, and two Line Filter Screws.
8. Remove the Line Filter Bracket and then remove the Power Supply.
9. Place the Media Hub Assembly into the Hub Mount. Secure the Shaft to Hub Mount using the xxxx , ensuring that both are completely tightened before proceeding.
10. Install the Power Supply then place the Line Filter Bracket onto the Line Filter.
11. Secure the Power Supply using the Power Supply Screws and the Line Filter Screws.
12. Insert the Ground Strap xxxx into the Lock Washer and the Ground Strap Lug. Then secure the Ground Strap Lug to the chassis using the Ground Strap xxxx and Lock Washer.
13. Check all Power Supply cable connections then place the Cover onto the printer.
14. Install and tighten the Cover Screws on the outside of the printer. Tighten the Cover Screws on the Centerplate.
15. Connect the interface cable(s). Plug the power cord into the AC Receptacle and turn ON the Power Switch.

This completes the installation process. For media loading instructions, please refer to the Operator's Manual.