User Manual Q&AAnswer
Feb 17, 2025 - 12:59 AM
To properly charge your Intermec CN50 using the Charge-Only Multidock, please follow these steps:
1. Ensure that you have the necessary items: a UL Listed power supply (12 VDC and 5 A for the United States, 12 VDC and 4 A for Canada), and a country-specific AC power cord.
2. Connect the AC power cord to the power supply.
3. Plug the power supply into a suitable electrical outlet.
4. Locate the charging contacts on the bottom of your Intermec CN50 device.
5. Align the charging contacts on the device with the corresponding charging pins on the Charge-Only Multidock.
6. Gently insert the device into the dock, ensuring a secure connection.
7. The device will begin charging automatically once properly docked.
8. Monitor the charging progress on the device's screen or LED indicators, if available.
9. Leave the device in the dock until it reaches a full charge. The charging time may vary depending on the battery level and capacity.
10. Once fully charged, remove the device from the dock by gently lifting it out.
11. Unplug the power supply from the electrical outlet when not in use.
Please note that these instructions are a general guideline. For more detailed information and safety precautions, refer to the Intermec CN50 Charge-Only Multidock Instructions manual provided by the manufacturer.
Add New Comment