User Manual Q&AAnswer
Feb 17, 2025 - 12:58 AM
To connect and set up the Intermec CN50 Ethernet Multidock, please follow these steps:
1. Ensure that you have the necessary items: a UL Listed power supply (12 VDC and 5 A for the United States, 12 VDC and 4 A for Canada), a country-specific AC power cord, and Ethernet cables.
2. Connect the UL Listed power supply to the power input on the back of the Multidock.
3. Connect the country-specific AC power cord to the power supply, and then plug it into a power outlet.
4. Connect one end of an Ethernet cable to the Ethernet port on the back of the Multidock.
5. Connect the other end of the Ethernet cable to your network switch or router.
6. Repeat steps 4 and 5 for each additional Multidock you want to connect to your network.
7. Once all the Multidocks are connected to the network, you can place the Intermec CN50 devices into the Multidock slots for charging and communication.
Please note that for detailed instructions and any specific restrictions associated with this product, refer to the Compliance Insert provided with the Multidock.
Add New Comment