User Manual Q&AAnswer
Feb 17, 2025 - 12:55 AM
To clean the filter of the SHARP UL-C10UA-W Portable Air Conditioner, follow these steps:
1. Turn off the air conditioner and disconnect the power plug.
2. Locate the filter on the unit. It is usually located behind the front panel or on the side of the unit.
3. Press the clasp on the filter and remove it from the unit.
4. Use a vacuum cleaner or water to clean the filter. If the filter is very dirty, you can use warm water (40°C) with a neutral detergent to clean it. Do not use volatile liquid or corrosive detergent.
5. After cleaning, let the filter dry in a shady place.
6. Once the filter is dry, reinstall it back into the unit. Make sure it is installed correctly.
7. Close the front panel or side panel of the unit.
8. Plug in the power cord and turn on the air conditioner.
It is recommended to clean the filter about once every three months, or more frequently if there is a large amount of dust in the environment. Cleaning the filter helps maintain the performance and efficiency of the air conditioner.
Add New Comment