User Manual Q&AAnswer
Feb 17, 2025 - 12:54 AM
To attach the scan handle on the Intermec CN51, follow these steps:
1. Locate the scan handle attachment points on the CN51 device. These attachment points are located on the top and bottom of the device.
2. Align the scan handle with the attachment points, ensuring that the handle is facing the desired direction.
3. Gently push the scan handle onto the attachment points until it clicks into place. Make sure it is securely attached.
To remove the scan handle from the Intermec CN51, follow these steps:
1. Firmly hold the CN51 device with one hand.
2. With your other hand, press the release buttons located on both sides of the scan handle.
3. While pressing the release buttons, gently pull the scan handle away from the attachment points.
4. Continue pulling until the scan handle is completely detached from the device.
Please note that these instructions are general guidelines and may vary slightly depending on the specific model or version of the Intermec CN51. For more detailed instructions, please refer to the user manual provided with the product.
Add New Comment