How do I properly use the Intermec CN50 Quad Charger? (Intermec CN50 Quad Charger Instructions Manual)

Answer

manuals.plus

Feb 17, 2025 - 12:46 AM


To properly use the Intermec CN50 Quad Charger, please follow these instructions:

1. Ensure that you have a UL Listed power supply with an output rated at 12 VDC and 2.5 A. This power supply should be qualified by Intermec and compatible with the device.

2. Connect the appropriate AC power cord to the power supply.

3. Plug the power supply into a suitable power outlet.

4. Place up to four Intermec CN50 devices into the charging slots of the Quad Charger. Make sure the devices are properly aligned and securely seated.

5. The charging process will begin automatically once the devices are properly inserted. The charging status of each device is indicated by the LED lights on the Quad Charger. A solid green light indicates that the device is fully charged, while a blinking green light indicates that the device is currently charging.

6. Leave the devices in the Quad Charger until they are fully charged. The charging time may vary depending on the battery level of each device.

7. Once the devices are fully charged, you can remove them from the Quad Charger for use.

Please note that it is important to refer to the Compliance Insert for any restrictions associated with the product. For further information and troubleshooting, you can consult the CN50 and CN51 Quad Charger (AC21) Instructions manual, which can be found at www.honeywellaidc.com or by referring to the P/N 943-229-005.