User Manual Q&AAnswer
Feb 17, 2025 - 12:44 AM
To install the LARSON GAU-12-IPS-LED-UV Black Light Swivel Mount Fixture, follow these steps:
1. Choose the desired location for mounting the fixture.
2. Use 1/4" screws (not included) to secure the fixture in place.
3. Loosen the mounts at the ends of the fixture to adjust the angle to your desired position.
4. Once the fixture is positioned correctly, tighten the mounts to hold it in place.
5. Run the cord and plug it into a matching receptacle within the operating voltage range (12-24 DC).
6. Make sure to follow acceptable wiring practices as outlined by the NEC/CEC for either ordinary or hazardous locations, depending on your installation.
7. Once the wiring is complete, energize the luminaire and toggle the power switch ON to illuminate the light.
Please note that these instructions may not cover all details or variations of the product or your specific installation requirements. If you need further assistance or information not covered in the manual, you can contact LARSON ELECTRONICS by email at sales@larsonelectronics.com or by phone at 1-800-369-6671.
For warranty and return information, please visit larsonelectronics.com.
Add New Comment