User Manual Q&AAnswer
Feb 17, 2025 - 12:42 AM
To replace the tethered stylus on the Intermec CN51, please follow the instructions below:
1. Ensure that the device is powered off.
2. Locate the stylus holder on the device. It is usually located on the top or side of the device.
3. Gently pull the stylus out of the holder to remove it.
4. Take the replacement stylus and insert it into the stylus holder. Ensure that it is securely seated.
5. If the replacement stylus has a tether attached, make sure to thread the tether through the designated hole or loop on the device to secure it.
6. Once the replacement stylus is in place, you can power on the device and begin using it.
For more detailed instructions and illustrations, please refer to the Intermec CN51 Tethered Stylus Instruction Manual. You can find the manual on the Intermec website at www.intermec.com.
Add New Comment