User Manual Q&AAnswer
Feb 17, 2025 - 12:37 AM
Answer: To attach the USB cable retainer to the Honeywell CN70 device, please follow these steps:
1. Locate the USB port on the Honeywell CN70 device. The USB port is typically located on the bottom or side of the device.
2. Take the USB cable retainer and align it with the USB port. The retainer should have a small opening that matches the shape of the USB port.
3. Gently push the retainer onto the USB port, making sure it fits securely. You may need to apply a slight amount of pressure to ensure a tight fit.
4. Once the retainer is attached, you can insert the USB cable into the retainer. The retainer will help secure the USB cable in place and prevent it from accidentally being disconnected.
Please note that the USB cable retainer may vary slightly depending on the specific model of the Honeywell CN70 device. If you have any difficulties or need further assistance, it is recommended to refer to the user manual provided by Honeywell Scanning & Mobility or contact their customer support for additional guidance.
Add New Comment