User Manual Q&AAnswer
Feb 17, 2025 - 12:06 AM
The Optoma FHDS130 All In One SOLO LED Display is designed for quick and easy installation. Here are the steps to install the display:
1. Unbox the display: Start by unpacking the display and its components carefully. Ensure that all the necessary accessories are included.
2. Mount the display: Determine the desired location for the display and mount it securely. You may use an optional mounting frame for this purpose.
3. Connect the cables: Connect the necessary cables to the display. The FHDS130 offers various input and output connections, including 2 x HDMI 2.0, 1 x 3G-SDI, 1 x VGA, 1 x RJ45, 1 x RS232, 1 x USB-B service, 2 x USB-A, 1 x USB-A service, and 1 x HDBaseT. Additionally, there is 1 x Audio 3.5mm output.
4. Power on the display: Connect the power supply (200 - 240V) to the display and turn it on.
5. Adjust the image: The FHDS130 comes pre-calibrated out of the box, ensuring optimized image quality. However, if you need to make any adjustments, you can use the built-in scaler-switcher and sender to fine-tune the display settings.
6. Enjoy your display: Once the installation is complete and the image is adjusted to your liking, you can start using the Optoma FHDS130 All In One SOLO LED Display for your desired applications.
Please refer to the owner's manual for more detailed instructions and specifications.
Add New Comment