User Manual Q&AAnswer
Feb 17, 2025 - 12:01 AM
To install the COUGAR STC 400, 500, 600, 700 Power Supply, please follow these steps:
1. Before you begin, make sure to read the "Warnings and safety notes" section in the user manual.
2. Place the power supply unit (PSU) into its designated place within the case and fix it with the supplied screws.
3. Insert the plugs for the mainboard supply (24-pin, 4-pin, and possibly 8-pin) into the respective slots on the motherboard.
4. Connect the disk drives and, if necessary, the graphics cards to the PSU using the appropriate connectors.
5. Close the PC case and ensure that the PSU power switch is set to the "0" position.
6. Connect the PSU to the power network using the supplied power cord. Only use the power cord provided in the package, as low-quality cords can damage your PSU and PC system.
7. Turn on the PSU and then start your PC.
For more detailed instructions and illustrations, please refer to the "Installation/Accessories" section in the user manual.
Note: It is important to follow all safety precautions and ensure that the PSU is not opened or tampered with by unauthorized individuals.
Add New Comment