How do I install the Welltime 11514753-53316528 Toilet Seat? (welltime 11514753 53316528 toilet seat Instruction Manual)

Answer

manuals.plus

Feb 16, 2025 - 11:37 PM


To install the , please follow these steps:

1. Start by removing the old toilet seat if there is one. To do this, locate the two plastic wing nuts on the underside of the toilet bowl and unscrew them counterclockwise until the old seat can be lifted off.

2. Take the new Welltime toilet seat and position it over the toilet bowl, aligning the holes in the seat with the holes in the toilet bowl.

3. Insert the plastic bolts through the holes in the toilet seat and the corresponding holes in the toilet bowl.

4. Secure the toilet seat in place by tightening the plastic wing nuts onto the bolts. Use your hand to tighten them firmly, but be careful not to overtighten and risk damaging the toilet seat or toilet bowl.

5. Once the toilet seat is securely attached, check for any wobbling or instability. If necessary, adjust the position of the seat or tighten the wing nuts further to ensure a stable installation.

Please note that these are general installation instructions. It's always recommended to refer to the specific instructions provided in the manual that came with your Welltime 11514753-53316528 Toilet Seat for any additional details or variations.

If you have any further questions or need assistance during the installation process, you can contact the Welltime service team using the contact information provided in the manual. They will be able to provide you with prompt professional advice and support.