User Manual Q&AAnswer
Feb 16, 2025 - 11:27 PM
To install the PRODVX DS-15 Signage Display, please follow these steps:
1. Ensure that you have all the parts included in the package. The parts typically included are the DS-15 Signage Display unit, a power adapter, a mounting bracket, screws, and a user manual.
2. Choose a suitable location for the display. It should be a flat surface with enough space to accommodate the display and allow for proper ventilation.
3. Attach the mounting bracket to the back of the DS-15 Signage Display using the provided screws. Make sure it is securely fastened.
4. Determine the desired mounting location on the wall or other surface. Use a level to ensure the bracket is straight.
5. Mark the mounting hole locations on the wall and drill pilot holes if necessary.
6. Attach the mounting bracket to the wall using appropriate screws or anchors, ensuring it is securely fixed.
7. Carefully lift the DS-15 Signage Display and align it with the mounting bracket. Slide the display onto the bracket until it locks into place.
8. Connect the power adapter to the DS-15 Signage Display and plug it into a suitable power outlet.
9. Turn on the display using the power button located on the side or bottom of the unit.
10. Follow the on-screen instructions to set up the display according to your requirements.
For more detailed instructions and diagrams, please refer to the PRODVX DS-15 Signage Display Instruction Manual included in the package.
Add New Comment