How do I install the WATERWARE FWE1500 Loft Floor Mount Bath Spout Chrome? (WATERWARE FWE1500 Bath Spout Chrome Instruction Manual)

Answer

manuals.plus

Feb 16, 2025 - 11:15 PM


Installation of the WATERWARE FWE1500 Loft Floor Mount Bath Spout Chrome can be done by following these steps:

1. Prepare the installation area: Ensure that the floor is level and clean before starting the installation process. Make sure there is enough space for the bath spout and that the plumbing connections are accessible.

2. Attach the mounting bracket: Take the mounting bracket provided with the bath spout and secure it to the floor using appropriate screws or anchors. Ensure that the bracket is securely fixed to provide stability for the bath spout.

3. Connect the water supply: Connect the water supply lines to the appropriate plumbing connections. It is recommended to use a professional plumber for this step to ensure proper installation and prevent any leaks.

4. Install the bath spout: Slide the bath spout onto the mounting bracket, ensuring that it is securely attached. Use any provided screws or fasteners to secure the spout in place.

5. Test for leaks: Once the installation is complete, turn on the water supply and check for any leaks. If any leaks are detected, tighten the connections or seek professional assistance to fix them.

Please note that this is a general overview of the installation process. For specific instructions and diagrams, please refer to the WATERWARE FWE1500 Loft Floor Mount Bath Spout Chrome Instruction Manual that came with the product.