How do I install the ETI 564212420 5 Inch Utility Light? (eti 564212420 5 Inch Utility Light User Guide)

Answer

manuals.plus

Feb 16, 2025 - 11:14 PM


To install the ETI 564212420 5 Inch Utility Light, follow these steps:

1. Select a suitable location that can support the weight of the fixture.
2. Determine the method for mounting the fixture based on the type of ceiling.
3. Install a mounting  xxxx  in each electrical box hole but do not tighten fully.
4. Connect the hot and neutral (black and white) wires from the J-box to the same color wires from the fixture body. Connect the grounding wire from the J-box to the green wire from the fixture body. Use wire connectors to cover the wire connections and ensure they are fastened securely.
5. Cover the wire connectors with electrical tape for a more secure connection.
6. Position the wires back inside the electrical box.
7. Make the mounting  xxxx  head cross the large ends of the keyholes on the fixture body, slide the base towards the narrow hole, and fasten these screws securely.
8. Restore power at the electrical panel. Turn on the light switch to activate the fixture.

Please note that if you are unfamiliar with electrical installations, it is recommended to contact a qualified electrician to do the installation.

For more information, refer to the ETI 564212420 5 Inch Utility Light User Guide or visit the website at www.ETiSSL.com for warranty, troubleshooting, or care and cleaning details.