User Manual Q&AAnswer
Feb 16, 2025 - 11:10 PM
According to the user manual for the Danfoss AB-PM Connection Set DN 15-25, here are the steps to assemble the product:
1. Start by ensuring that you have all the necessary parts listed in the parts list section of the manual.
2. Connect the impulse tube to the appropriate ports on the connection set. The manual should provide guidance on which ports to use based on your specific installation requirements.
3. Pay attention to the flow direction indicated on the connection set. The flow direction arrow should be aligned with the direction of the fluid flow in your system. This is important for proper operation.
4. Use the provided manual shut-off valve, which is made of plastic, to control the flow of fluid through the connection set. Install it in the desired location according to your system requirements.
5. Once the assembly is complete, you may need to adjust the settings of the connection set. Refer to the "Setting" section of the manual for detailed instructions on how to do this.
Please note that the above instructions are a general guideline based on the information provided. It is always recommended to refer to the specific user manual for your product model for accurate and detailed assembly instructions.
Add New Comment