User Manual Q&AAnswer
Feb 16, 2025 - 11:09 PM
To change the network address and communication settings of the Danfoss AK-CC55 Water Loop Controller, you can use the AK-UI55 Bluetooth display and the AK-CC55 Connect service app. Here are the steps:
1. Connect the AK-UI55 Bluetooth display to the AK-CC55 Water Loop Controller.
2. Open the AK-CC55 Connect service app on your smartphone or tablet.
3. In the app, navigate to the settings menu.
4. Look for the options to change the network address and communication settings.
5. Select the desired network address and communication settings.
6. Save the changes and exit the settings menu.
For more detailed information on how to use the AK-UI55 Bluetooth display and the AK-CC55 Connect service app, please refer to the AK-CC55 Documentation, which can be found on the Danfoss website: [link to documentation](https://www.danfoss.com/en/products/e...).
Please note that the default communication settings for the AK-CC55 Water Loop Controller are "8 bit, Even parity, 1 stop bit" and the communication speed is set to "auto detection".
Add New Comment