How do I connect the SWEBAD VASTERVIK 150 Massage Bathtub to the electrical power line? (SWEBAD VASTERVIK 150 Massage Bathtub Owner's Manual)

Answer

manuals.plus

Feb 16, 2025 - 11:07 PM

To connect the SWEBAD VASTERVIK 150 Massage Bathtub to the electrical power line, it is recommended to hire a certified professional electrician. They will ensure that all local regulations are followed and the installation is done safely. Here are the general steps for connecting the bathtub:

1. Length of the power cable: The length of the power cable should be sufficient to allow moving the product away from walls if necessary. The minimum length requirement is not specified in the manual.

2. Cable thickness and number of cores: The thickness of the cable and the number of cores depend on the performance of the device and should meet the local requirements. It is important to consult with the electrician to determine the appropriate cable specifications.

3. Connections: All connections must be made by an authorized electrician. The electrician will ensure that the cold and hot water inputs are connected properly using G ½ connectors. The sewage opening should have a diameter (D) of 50 mm.

4. Electrical specifications: The electrical connections should be executed by a certified professional electrician. The local regulations and permissible load on one phase must be observed. The product's aluminum frame should be connected to all conductive objects in the same room for local auxiliary equipotential bonding. The copper earth continuity connector should have a minimum cross-section of 2.5 sq mm.

5. Circuit protection: The power circuit of the product must be protected with a residual current circuit breaker with a 30mA threshold. Additionally, a circuit breaker with an operating current leveled with the consumed current of the product should be installed.

Please note that the specific instructions and diagrams for connecting to the power network according to local opportunities are not provided in the manual. It is crucial to consult with a certified electrician who can assess the specific requirements of your installation location and ensure a safe and compliant connection.