User Manual Q&AAnswer
Feb 16, 2025 - 10:48 PM
To install and set up the Immax Neo 07732L Smart Thermostatic Head, please follow these steps:
1. Power Supply: Insert 2 x AA 1.5V alkaline batteries into the thermostatic head.
2. Temperature Setting: The temperature setting range is 5°C to 35°C. Use the "Immax NEO PRO" app or the buttons on the thermostatic head to set the desired temperature.
3. Auto Mode Setting: Long press the button for about 3 seconds to access advanced settings. Short press the button to switch to auto mode setting. Short press the button again to choose the desired item (e.g., days). Use the rotation to adjust the value. Short press the button to choose other settings (e.g., hour, minute, time period) and adjust the values. After finishing the settings, the thermostatic head will automatically save and exit after about 10 seconds.
4. Valve Control Type: The thermostatic head controls the valve based on a learning algorithm. If the desired room temperature is 2 degrees higher than the actual temperature, the valve opens 100%. If the desired room temperature is 1 degree higher, the valve opens to 75%. If the desired room temperature is 0.5 degrees higher, the valve opens to 50%. If the desired room temperature is 1 degree lower, the valve opens to 25%. If the desired room temperature is 2 degrees lower, the valve closes (0%).
5. Advanced Options: Press and hold the button for 3-5 seconds to access advanced settings. Short press the button to select the advanced option parameter setting icon. Short press the button again to enter the advanced option parameter setting. Use the rotation to adjust the value. After each parameter is set, short press the button to enter the next option setting. If there is no operation for 10 seconds, the parameters will be saved and the setting will exit.
Please refer to the Immax Neo 07732L Smart Thermostatic Head User Manual for more detailed instructions and illustrations.
Add New Comment