User Manual Q&AAnswer
Feb 16, 2025 - 10:40 PM
To properly inflate the MIVARDI M-BOAT 270 S Boat, follow these steps:
1. Spread the boat on a flat surface without sharp objects.
2. Use the included foot air pump to inflate the boat.
3. Inflate the boat to approximately 50%.
4. Insert the bench in the desired location.
5. Inflate the boat fully and check the valves for air leaks.
6. Always close the valves with the cover.
To deflate the boat, follow these steps:
1. Place the boat on a flat surface without sharp objects.
2. Unscrew the caps from the valve.
3. Deflate the boat by pressing the valve.
4. Use a foot pump for complete deflating - xxxx the hose into the hole of the air drain pump.
5. Roll up the boat and store it in a dry place out of direct sunlight.
Please refer to the owner's manual for more detailed instructions and safety precautions.
Add New Comment