User Manual Q&AAnswer
Feb 16, 2025 - 10:31 PM
To set the combination for the LOCKER DOWN LD2028CD/LD2028CDEX safe in your Dodge Ram, follow these steps:
1. Open the safe door.
2. Locate the combination dial on the front of the safe.
3. Turn the dial clockwise at least three full rotations to clear any previous combination.
4. Stop turning the dial when the first number of your desired combination aligns with the index mark on the dial.
5. Turn the dial counterclockwise, passing the first number once, and stop when the second number of your desired combination aligns with the index mark.
6. Turn the dial clockwise again, directly to the third number of your desired combination.
7. Test the combination by turning the dial clockwise to the rightmost position and then counterclockwise to the leftmost position.
8. If the safe opens, the combination is set successfully. If not, repeat the steps above.
Note: It is recommended to set the combination with the safe door open to avoid locking yourself out. Make sure to keep your combination in a secure place and avoid sharing it with unauthorized individuals.
For further assistance or additional information, please refer to the LOCKER DOWN LD2028CD/LD2028CDEX 2013 to 2018 Dodge Ram Instruction Manual.
Add New Comment