User Manual Q&AAnswer
Feb 16, 2025 - 10:14 PM
Thank you for choosing the LeGer Lena Gercke upholstered bed "Meliha". Here is a step-by-step guide on how to assemble the bed:
1. Start by unpacking all the components and lay them out in an organized manner to ensure you have all the necessary parts.
2. Begin by attaching the side rails to the headboard. Align the holes on the side rails with the corresponding holes on the headboard. Use the provided screws and tighten them securely using a screwdriver or an Allen wrench.
3. Next, attach the footboard to the side rails in the same manner as step 2. Ensure that all the holes are aligned properly before tightening the screws.
4. Once the headboard and footboard are securely attached to the side rails, it is time to install the slats. Lay the slats across the bed frame, ensuring they are evenly spaced and aligned. Some beds may have pre-drilled holes for the slats, while others may require you to simply place the slats on top of the frame.
5. After the slats are in place, attach the center support beam if provided. This beam is typically placed horizontally across the middle of the bed frame and provides additional support. Secure it using the provided screws or brackets.
6. Finally, double-check all the connections and tighten any loose screws if necessary. Ensure that all parts are securely fastened to avoid any instability or wobbling.
Please note that the specific assembly instructions may vary slightly depending on the model of the LeGer Lena Gercke upholstered bed "Meliha" you have. It is always recommended to refer to the instruction manual provided with your specific product for detailed and accurate assembly instructions.
If you have any further questions or need additional assistance, please consult the instruction manual that came with your bed.
Add New Comment