User Manual Q&AAnswer
Feb 16, 2025 - 10:00 PM
To set the combination lock on the LOCKER DOWN LD2034/LD2034EX for a 2011-2016 Ford Super Duty, follow these steps:
1. Open the safe door.
2. Locate the combination lock on the inside of the safe door.
3. Turn the dial to the right (clockwise) at least four complete rotations to clear any previous combination.
4. Stop turning the dial when the first number of your desired combination aligns with the reference mark on the lock.
5. Turn the dial to the left (counterclockwise), passing the first number once, and stop when the second number of your combination aligns with the reference mark.
6. Turn the dial to the right again, directly to the third number of your combination.
7. Pull the handle or xxxx to open the safe door.
8. Test the combination by closing the door and entering the three numbers in the correct sequence. The door should open if the combination is set correctly.
Note: It is recommended to set the combination with the door open to avoid locking yourself out. Make sure to remember your combination and keep it in a secure place.
For further assistance or if you encounter any issues during the process, refer to the LOCKER DOWN LD2034/LD2034EX installation guide or contact LOCKER DOWN customer support.
Add New Comment