User Manual Q&AAnswer
Feb 16, 2025 - 09:49 PM
To install the DeLOCK Thermostat for DIN Rail, follow these steps:
1. Attach the device to a 35 mm DIN rail in a control cabinet. The thermostat has integrated clips on the back for easy mounting.
2. Connect the device to a filter fan, heat exchanger, or signaling device using the 2-pin terminal for 2.5 mm² wires.
3. Use the red rotary xxxx on the thermostat to adjust the temperature as required. The temperature setting range is from 0 °C to 60 °C.
Please note that the installation should only be carried out by qualified electricians in compliance with the usual national power supply guidelines. Protective measures must be ensured, and the technical specifications should not be exceeded. The device should be installed in the upper area of the control cabinet, away from heaters or other heat-generating components. Also, make sure not to cover the ventilation slots on the thermostat.
For any further questions or assistance, you can contact Delock's customer support at support@delock.de.
Add New Comment