User Manual Q&AAnswer
Feb 16, 2025 - 09:37 PM
To assemble and fit the blender jug on the OBH NORDICA High Speed Blender PERFECTMIX plus, follow these steps:
1. Moisten the seal (F3, O3) (even if already fitted on the blade unit (F1, O1)). Be careful to correctly fit the seal (F3, O3) back onto the blade unit (F1, O1) the correct way up.
2. Check that the seal is in place on the blade unit.
3. Place the blade unit on the locking ring.
4. Turn the jug upside down and place the blade unit with locking ring on the base.
5. Make sure the locking ring is locked correctly: the two arrows must be aligned.
6. Add the ingredients to the assembled jug without exceeding the maximum level indicated:
- 1.5 L for thick mixtures
- 1.25 L for liquid preparations
7. Fit the lid on the jug. To avoid any splashes during blending, make sure that the curved tabs on the lid are aligned with the spout and handle. Fit the measuring cap in the hole on the lid. Then position the bowl on the motor unit.
Please refer to the instruction manual for visual illustrations and further details on assembling and fitting the blender jug.
Add New Comment