User Manual Q&AAnswer
Feb 16, 2025 - 09:33 PM
To properly inflate the F2 Inflatable Stand Up Paddle Board, follow these steps:
1. Choose a smooth and clean surface with enough space to unpack and unfold the SUP.
2. Make sure all parts are present and in perfect condition.
3. Attach the air pump hose to the valve on the SUP, making sure it is securely connected.
4. Use the air pump to inflate the SUP to a maximum pressure of 1 bar (15 psi). Inflate it completely.
5. To reach the maximum pressure, you can switch from double to single action on the pump.
6. Once the SUP is fully inflated, remove the pump hose and close the valve tightly with the valve cap.
Note: Do not pump up the SUP near sharp or pointed objects or on rough or pebbly surfaces. Only open the valve to inflate and deflate. Make sure no sand or similar debris gets into the valve.
It is important to follow these steps to ensure proper inflation and avoid any damage to the SUP.
Add New Comment