User Manual Q&AAnswer
Feb 16, 2025 - 08:58 PM
To properly inflate the F2 Inflatable Stand Up Paddle Board, follow these steps:
1. Choose a smooth and clean surface to unpack and unfold the SUP.
2. Make sure all parts are present and in perfect condition.
3. Attach the air pump with pressure gauge to the valve on the SUP.
4. Inflate the SUP using a foot pump or double-stroke piston pump with appropriate attachments.
5. Inflate the SUP completely, reaching a filling pressure of 0.7 bar (10 psi) to a maximum of 1 bar (15 psi).
6. Make sure to only open the valve to inflate and deflate, and keep the area around the valve dry and clean.
7. To reach the maximum pressure, you can switch from double action to single action on the pump.
8. Once the SUP is fully inflated, close the valve tightly and remove the pump.
9. Check the SUP for any air leaks by applying a little soapy water around the valve and seams. If bubbles form, there may be a leak that needs to be repaired.
10. If the SUP loses air or has a leak, refer to the repair instructions in the manual or contact the manufacturer for assistance.
Note: It is important to never exceed the maximum recommended pressure of 1 bar (15 psi) when inflating the SUP.
Add New Comment