User Manual Q&AAnswer
Feb 16, 2025 - 08:56 PM
To properly inflate the F2 Inflatable Stand Up Paddle Board, follow these steps:
1. Choose a smooth and clean surface to unpack and unfold the SUP.
2. Make sure all parts are present and in perfect condition.
3. Attach the air pump with pressure gauge to the valve on the SUP.
4. Inflate the SUP using a foot pump or double-stroke piston pump with appropriate attachments and pressure gauges.
5. Open the valve and pump air into the SUP until it reaches the recommended operating pressure of 1 bar (15 psi).
6. Close the valve tightly and remove the pump.
7. Check the SUP for any leaks by rinsing it with soapy water. If bubbles form, there may be a leak that needs to be repaired.
8. If the SUP loses air, check the valve and tighten or replace it if necessary.
Note: Do not use a compressor or compressed air bottle to inflate the SUP, as this can cause damage.
Add New Comment