User Manual Q&AAnswer
Feb 16, 2025 - 08:53 PM
To connect your YBA Heritage CD200 CD Player to your amplifier, follow these steps:
1. Locate the RCA Audio output on the rear of the CD player.
2. Connect one end of an RCA cable to the RCA Audio output of the CD player.
3. Locate the corresponding RCA Audio input on your amplifier.
4. Connect the other end of the RCA cable to the RCA Audio input of your amplifier.
5. Ensure that the CD player and amplifier are both turned off before making any connections.
6. Once the connections are secure, turn on the CD player and amplifier.
7. Use the SOURCE selector on the front panel of the CD player or the remote control to select the CD input on your amplifier.
8. You should now be able to play audio from the CD player through your amplifier.
Note: If your amplifier has balanced inputs, you can use the Balanced Audio output on the CD player for higher quality audio. Connect XLR cables from the Balanced Audio output of the CD player to the balanced inputs on your amplifier, following the correct wiring configuration (Pin 1 - Ground; Pin 2 - Hot; Pin 3 - Cold).
For more detailed information and illustrations, please refer to the "Discovering your CD200: Rear view" section of the YBA Heritage CD200 CD Player User Manual.
Add New Comment