User Manual Q&AAnswer
Feb 16, 2025 - 08:52 PM
To properly connect the DC plug of a Phihong PSA Wall Plug-In Adapter to your equipment, please follow these steps:
1. Before attaching the DC plug, make sure to unplug the adapter from the AC power source.
2. Verify that the output connector, polarity, output voltage, and output current of the adapter are suitable for and within the rating of your equipment. This information can be found in the product manual or datasheet.
3. Hold the plug and the device you want to connect and align the DC plug with the equipment's DC input port.
4. Insert the DC plug firmly into the equipment's DC input port until it is securely connected.
5. Ensure that the output cable is protected against mechanical stress and is not at risk of being trampled.
6. During use, make sure there is good ventilation around the device to prevent overheating. Maintain a clearance of 10-15cm from other heat sources.
7. If the equipment is not going to be used for a long period of time, it is recommended to disconnect it from the power supply to avoid potential damage from voltage peaks or lightning strikes.
Please note that these instructions are general guidelines. For specific instructions related to your equipment and the Phihong PSA Wall Plug-In Adapter model you are using, refer to the product manual or contact Phihong's customer support for further assistance.
Add New Comment