User Manual Q&AAnswer
Feb 16, 2025 - 08:51 PM
To install the wheel kit on the FIRMAN P05703 Gas Start Portable Generator, follow these steps:
1. Slide the axle pin (A) through the wheel (B) and mount point on the frame.
2. Place a flat washer (D) on the axle pin.
3. Secure the wheel and washer with a cotter pin (C).
4. Attach the support leg (G) to the generator frame using a flange bolt (E) (M8X16) and a flange lock nut (F) (M8).
5. Secure the handle (K) to the frame using a bolt (H) (MBx50) and a flange nut (F) (M8).
For more detailed instructions and illustrations, please refer to the operator's manual provided with the generator.
Add New Comment