How do I install the MOEN 199785 Optional Control Box Wall Mount Kit? (Moen 199785 Control Box Wall Mount Kit Instruction Manual)

Answer

manuals.plus

Feb 16, 2025 - 08:45 PM

To install the MOEN 199785 Optional Control Box Wall Mount Kit, please follow the steps outlined in the instruction manual provided with the product. Here is a general overview of the installation process:

1. Start by gathering all the necessary tools and materials mentioned in the instruction manual. Ensure that you have everything you need before beginning the installation.

2. Locate a suitable spot on the wall where you want to mount the control box. Ensure that it is within reach and easily accessible.

3. Use a stud finder to locate the wall studs in the chosen area. It is important to mount the control box securely to the studs for stability.

4. Once the studs are located, mark the positions where the mounting screws will go. Make sure to align the control box properly.

5. Use a drill to create pilot holes at the marked positions. This will make it easier to insert the screws later.

6. Attach the control box to the wall using the provided screws. Make sure it is securely fastened to the wall.

7. Connect the necessary electrical wires to the control box according to the wiring diagram provided in the instruction manual. Ensure that all connections are secure and properly insulated.

8. Test the control box to ensure it is functioning correctly. Follow the instructions in the manual to activate and control the desired features.

Please note that this is a general overview of the installation process. For detailed and specific instructions, please refer to the MOEN 199785 Optional Control Box Wall Mount Kit Instruction Manual.