User Manual Q&AAnswer
Feb 16, 2025 - 08:40 PM
To install the JAP ARISTO Retractable ATTIC Stairs, please follow the steps outlined below:
1. Place the packaged staircase underneath the mounting hole aligned in the same direction as after installation.
2. Remove the packaging materials and leave the staircase lying on the transport pallet, taking care to protect the lower cap from getting scratched.
3. Do not remove the protective film from the lower cap until the construction opening is completely cleaned.
4. Ensure that wet building processes in new structures are mature enough to prevent moisture from causing rust damage to the cap.
5. The staircase has a maximum load capacity of 150 kg and is intended for access to residential attics.
6. Adjustments to the spring position, bracket positions, or lengthening or shortening of the staircase should only be done after consultation with a professional service, such as the manufacturer's.
7. The staircase has one-sided control, meaning the person entering the attic cannot close the cap behind them.
8. When using a vapor barrier, ensure that the vapor barrier foil is connected all the way to the staircase frame to prevent water condensation on the staircase.
9. The builder is responsible for the correct installation.
For more detailed instructions and illustrations, please refer to the JAP ARISTO Retractable ATTIC Stairs Installation Guide provided by the manufacturer
Add New Comment