User Manual Q&AAnswer
Feb 16, 2025 - 08:33 PM
To install the TRIO 659011801, 659011887 Ceiling Lamp, please follow these steps:
1. Safety Precautions:
- Before starting the installation, ensure that the power supply is turned off.
- Use appropriate safety equipment, such as gloves and safety goggles, to protect yourself during installation.
2. Mounting the Ceiling Plate:
- Attach the ceiling plate to the ceiling using screws and anchors suitable for your ceiling type.
- Ensure that the ceiling plate is securely fastened and level.
3. Wiring:
- Connect the electrical wires from the ceiling to the corresponding wires on the ceiling lamp.
- Follow the color-coded instructions in the manual for proper wiring.
- Use wire connectors or terminal blocks to secure the connections.
- Make sure the connections are tight and insulated.
4. Attaching the Lamp:
- Align the lamp base with the ceiling plate and secure it using the provided screws.
- Ensure that the lamp is firmly attached and level.
5. Installing the Bulbs:
- Refer to the manual for the maximum wattage and type of bulbs recommended for the ceiling lamp.
- Insert the bulbs into the lamp sockets and twist them clockwise until they are securely in place.
6. Powering On:
- After completing the installation, turn on the power supply and test the lamp to ensure it is functioning properly.
- If the lamp does not turn on or there are any issues, double-check the wiring connections and consult a professional if needed.
Please note that this is a general overview of the installation process. For specific instructions and diagrams, please refer to the TRIO 659011801, 659011887 Ceiling Lamp Installation Guide provided with the product.
Add New Comment