User Manual Q&AAnswer
Feb 16, 2025 - 08:24 PM
To assemble the TRIO LIGHTING 309900631 Pendant Light, please follow the steps below:
1. Ensure that the power is switched off before starting the assembly process.
2. Carefully unpack all the components and lay them out on a clean and flat surface.
3. Take the main body of the pendant light and attach it to the ceiling using the appropriate mounting hardware. Make sure it is securely fastened.
4. Locate the six E14 sockets inside the main body of the pendant light. These sockets are where the light bulbs will be installed.
5. Insert the light bulbs into the E14 sockets. Ensure that the wattage of each bulb does not exceed 40W.
6. Once all the light bulbs are securely installed, connect the pendant light to the power supply. Make sure to use a suitable electrical connection method and follow all safety guidelines.
7. Switch on the power and test the pendant light to ensure it is functioning properly.
Please note that this answer is a general guide based on the information provided in the manual. For specific instructions and safety precautions, it is always recommended to refer to the official TRIO LIGHTING 309900631 Pendant Light Instruction Manual.
Add New Comment