User Manual Q&AAnswer
Feb 16, 2025 - 08:23 PM
To properly inflate the Mivardi M-BOAT 160 A Boat, follow these steps:
1. Spread the boat on a flat surface without sharp objects.
2. Use the included foot air pump to inflate the boat.
3. Inflate the boat to approximately 50%.
4. Inflate the floor separately, making sure to inflate it very firmly.
5. Insert the floor into the boat and level it evenly to the edges.
6. Insert the bench in the desired location.
7. Inflate the boat fully and check the valves for air leaks.
8. Always close the valves with the cover.
To deflate the boat and the floor, follow these steps:
1. Place the boat on a flat surface without sharp objects.
2. Unscrew the caps from the valve.
3. Deflate the boat by pressing the valve.
4. Drop and remove the inflatable floor.
5. Use a foot pump for complete deflating by screwing the hose into the hole of the air drain pump.
6. Roll up the boat and store it in a dry place out of direct sunlight.
Please refer to the owner's manual for more detailed instructions and illustrations on inflating and deflating the boat.
Add New Comment