User Manual Q&AAnswer
Feb 16, 2025 - 08:16 PM
To connect and set up the Audio Visual VGA UTP Extender 1X1 Splitter with Audio, please follow these steps:
1. Connect the VGA source (e.g., computer, DVD player) to the main VGA input of the Sender unit using a VGA cable.
2. Connect the VGA output of the Sender unit to a local display (e.g., monitor, TV) using a VGA cable.
3. Connect the Audio output of the Sender unit to a local sounder (e.g., speakers) using an audio cable.
4. Connect the Sender unit to each Receiver unit using a CAT-5e/6 cable.
5. Connect the VGA outputs of the Receiver units to remote displays using VGA cables.
6. Connect the Audio outputs of the Receiver units to remote sounders using audio cables.
7. Plug one 5V@2A power supply into the VGA UTP 1X1 Splitter unit.
8. Plug the other 5V@2A power supplies into each Receiver unit.
9. Make sure to insert and extract cables gently to avoid any damage.
For more detailed instructions and diagrams, please refer to the User Manual provided with the product.
Add New Comment