User Manual Q&AAnswer
Feb 16, 2025 - 08:11 PM
To inflate the Mivardi M-BOAT 320 AWB Boat, follow these steps:
1. Spread the boat on a flat surface without sharp objects.
2. Use the included foot air pump to inflate the boat.
3. Inflate the boat to approximately 50%.
4. Inflate the floor separately, making sure to inflate it very firmly.
5. Insert the floor into the boat and level it evenly to the edges.
6. Insert the bench in the desired location.
7. Inflate the boat fully and check the valves for air leaks.
8. Always close the valves with the cover.
To deflate the boat and the floor, follow these steps:
1. Place the boat on a flat surface without sharp objects.
2. Unscrew the caps from the valve.
3. Deflate the boat by pressing the valve.
4. Remove the inflatable floor.
5. Use a foot pump to completely deflate the boat.
6. Roll up the boat and store it in a dry place out of direct sunlight.
Please refer to the owner's manual for more detailed instructions and illustrations on the inflation and deflation process.
Add New Comment