Answer

Feb 16, 2025 - 08:10 PM
Sure! Here is a step-by-step guide on how to set up the Motorola VM65X Connect 5.0 Inch Video Baby Monitor:
1. Connecting the Power Supply for the Baby Unit:
- Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit.
- Connect the other end of the power adapter to a suitable power socket.
- The baby unit will turn on, and the power indicator will light up in blue.
2. Fixing the Magnetic Mount on the Wall:
- Mark the position of the xxxx holes on the wall.
- Install wall anchors (not provided) suitable for the wall type and mounting screws if needed.
- Fasten the mounting screws on the wall.
- Position the cable behind the base before attaching the base on the wall.
3. Connecting the Power Supply of the Parent Unit:
- Connect the small plug of the power adapter to the parent unit and the other end to the power socket.
- Only use the enclosed adapter (5VDC/1000mA).
- The parent unit can also be used with a rechargeable battery (Lithium ion battery 2000mAh) when not plugged into a power socket. We recommend charging the battery for at least 16 hours before first use and when the Parent Unit indicates the battery is low.
- Press and hold the POWER button on the top of the Parent Unit to turn it ON.
4. Using the Desktop Stand of the Parent Unit:
- Move the stand ring on the back of the parent unit downward.
- Rotate it by 90 degrees to set up the desktop stand.
5. Setting up the Baby Unit for Wi-Fi internet viewing:
- Install the Motorola Nursery App on your smart device by scanning the QR code provided or downloading it from the App Store for iOS devices or Google Play Store for Android devices.
- Open the Motorola Nursery App on your compatible smart phone or tablet.
- Follow the in-app instructions to create your account and connect to your device.
- Make sure your smart device meets the minimum system requirements mentioned in the manual.
6. Installation of Cot Mount:
- Assemble the 4 poles and the support base together as shown in the diagram.
- Fasten the top clamp either vertically on the upper rail or horizontally on the slats of the crib.
- Unlock the xxxx and open the top and bottom clamps, then move the supporting pole into the clamps.
- Place and press the bottom clamp against the lower rail, and push the lower pole downward before closing the bottom clamp with the xxxx .
- Fasten the knobs to close the holders of the top and bottom clamps to ensure the support poles are positioned stably.
- Install the flexible gooseneck extension into the top post, then insert the camera unit into the housing at the end of the extension.
- Connect the power adapter to the camera unit and the DC plug into the power socket of the cot mount.
- Power on the camera unit and adjust the flexible gooseneck for optimal view over the cot.
Please refer to the complete User's Guide, available for download from motorolanursery.com, for more detailed instructions and information on using the Motorola VM65X Connect 5.0 Inch Video Baby Monitor.
Add New Comment