User Manual Q&AAnswer
Feb 16, 2025 - 08:08 PM
To install the VIVOTEK FE9391-EHV-v2 Outdoor Network Fisheye camera, please follow these steps:
1. Before installation, ensure that the power is turned off if you detect any smoke or unusual odors.
2. Place the camera on a steady surface to prevent any instability.
3. Avoid inserting sharp or tiny objects into the camera to prevent damage.
4. When installing waterproof components such as cables or cable glands, make sure to replace or install them properly to maintain the IP65/66/67 warranty.
5. Refer to the user's manual for the recommended operating temperature range.
6. During a lightning storm, avoid touching the camera to prevent any electrical hazards.
7. Handle the camera with care and avoid dropping it.
For detailed hardware installation instructions, please refer to the user's manual provided with the camera. If you require warranty or RMA service, please contact authorized distributors or visit the VIVOTEK website for further assistance.
Note: The information provided here is a general guide. For specific installation instructions and safety precautions, it is always recommended to refer to the official user's manual provided by VIVOTEK.
Add New Comment