User Manual Q&AAnswer
Feb 15, 2025 - 06:25 AM
To make espresso using the AEG EC6-1 Series Espresso Machine, follow these steps:
1. Place the machine on a flat surface and plug it in. Fill the water tank with cold water.
2. Put the desired filter cup (one-cup or E.S.E pod) into the filter holder.
3. Fix the filter holder onto the brewing head by turning it anti-clockwise from "LOCK" to "CLOSE" position.
4. Place a warm cup on the drip tray.
5. Press the power button to start the pre-heating process. Wait until the power button and one-cup/two-cup buttons are steadily and fully lit.
6. Press the one-cup/two-cup button to start the brewing process. The machine will pump water through the coffee and into the cup.
7. When the brewing is finished, remove the filter holder clockwise, clean the filter, and clear the drip tray.
8. The machine will turn off automatically after 20 minutes of no operation.
Note: For two cups of espresso, use the two-cup filter cup and press the two-cup button.
Additional Tips:
- To make hot water, turn the xxxx to the hot water/steam position. Turn it off when the desired amount is dispensed.
- To froth milk for cappuccino/latte, fill a jug with milk and immerse the steam nozzle in the milk. Turn on the xxxx and froth the milk to the desired level. Turn off the xxxx when done.
- Clean the machine regularly by wiping the outer surfaces with a damp cloth. Clean the water tank, drip tray, and drip grid regularly.
- Descaling is recommended when all indicators blink 5 times with 5 beeps upon turning on the machine. Follow the descaling instructions in the manual.
- If you encounter any issues or malfunctions, contact the authorized service facility for repairs.
Please refer to the AEG EC6-1 Series Espresso Machine manual for more detailed instructions and safety precautions.
Add New Comment