User Manual Q&AAnswer
Feb 15, 2025 - 05:56 AM
To charge the BVP130 Electric Vacuum Pump, follow these steps:
1. Insert the smaller USB connector (micro USB) into the port at the top of the pump.
2. Insert the larger USB connector (USB 2.0) into an electric adapter with a USB port.
3. Alternatively, you can charge the pump by plugging it into a USB port (USB 2.0) of a computer or a laptop.
4. The charging speed may vary depending on the USB port's use. If the USB port is intended for data transfer only, the battery charging will take longer. If it is intended for charging electronic devices, the charging will be faster.
5. The indicator light on the pump will flash red during the charging process.
6. The charging is complete when the indicator light changes from red to green.
7. It usually takes 2 to 4 hours for the pump to be fully charged.
8. To maintain the optimal functioning of the battery, it is recommended to charge it at least once every 3 to 6 months.
Please refer to the "Charging" section in the user manual for more detailed instructions and precautions.
Add New Comment