User Manual Q&AAnswer
Feb 15, 2025 - 05:51 AM
To assemble the SERA Peyton Vanity, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Unpack all the components and lay them out on a clean, flat surface.
2. Start by attaching the side panels to the back panel using the provided screws. Make sure they are securely fastened.
3. Attach the bottom panel to the side and back panels using the screws provided. Ensure that all connections are tight.
4. Install the drawer slides onto the side panels according to the instructions in the manual. Make sure they are aligned properly.
5. Attach the drawer fronts to the drawer slides. Use the screws provided to secure them in place.
6. Install the adjustable feet onto the bottom panel. Adjust them to level the vanity on the floor.
7. Place the ceramic top onto the vanity base. Make sure it is centered and level.
8. Secure the ceramic top to the vanity base using the adhesive provided. Follow the instructions on the adhesive packaging for proper application.
9. Check all connections and make any necessary adjustments to ensure the vanity is stable and level.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the manual for your SERA Peyton Vanity model.
Add New Comment