User Manual Q&AAnswer
Feb 15, 2025 - 05:35 AM
To set the full and cut-off voltage on the HULK Hu6677b LCD Battery Meter, follow these steps:
1. Set the full voltage:
a. In the normal display interface, long press the button until the LCD screen displays the interface for setting the full voltage.
b. The battery symbol will display full grids of energy, indicating the full voltage setting status.
c. The default full voltage is 020.0V. The numerical code will cycle from the low bit to the high bit, showing the current setting digit.
d. Short press the button to set the digit. Note that the setting is divided into two parts: low bit and high bit.
e. For example, if you want to set the full voltage to 199.0V, set the low bit to 99.0V. When the cycle reaches the high bit, it will display 099V, and only the highest zero bit will flicker to indicate that it can be settled. Set the high bit to 199V to represent the full voltage as 199.0V.
2. Set the cut-off voltage:
a. After setting the full voltage, press the button longer until the screen shows the interface for setting the cut-off voltage.
b. The battery symbol will show zero grids, indicating the cut-off voltage setting status.
c. The default cut-off voltage is 016.0V. The setting method is the same as above.
d. The cut-off voltage is 0.8 times the full voltage by default. After setting the full voltage, the cut-off voltage will be automatically generated in the relationship of 0.8 times. If you want to reset it, you can do so.
e. After completing all the above settings, long press the button until the settings are saved and exit the setting status, restoring the normal display interface.
Please refer to the product manual for more detailed instructions and illustrations.
Add New Comment