User Manual Q&AAnswer
Feb 15, 2025 - 03:23 AM
To connect the Technics 110 Audio Amplifier to your microphone, you need to consider the type of microphone you are using. If you are using a dynamic microphone, which requires power matching, you can connect it directly to the amplifier using its source impedance. However, if you are using a voltage source microphone, such as a condenser microphone, you should not load it with its source impedance to avoid distortion and frequency discrimination.
For voltage source microphones, it is recommended to use at least 5 times their source impedance or operate them unloaded. It is recommended to use a 50 ohms impedance for these microphones.
Please refer to the "Input Termination/Microphone Loading Applications" section in the Technics 110 Audio Amplifier Instruction Manual for more information and guidelines on connecting different types of microphones.
Note: Always follow the manufacturer's instructions and guidelines for proper and safe usage of the amplifier.
Add New Comment