User Manual Q&AAnswer
Feb 15, 2025 - 03:12 AM
To adjust the cutting length of the Remington MB4700 Smart Beard Trimmer, you can do it manually or use the Profiles feature.
1. Adjusting Manually:
- Make sure the trimmer is turned off.
- Use the up and down buttons on the trimmer to manually adjust the cutting length.
- Tap the appropriate button to move the comb up or down in 0.1 mm increments.
- Hold your finger on the button to move the comb quickly.
- The display will show the selected length setting.
Note: You cannot change the length settings while the trimmer is running.
2. Using Profiles:
- When you adjust the comb length and then operate the trimmer, the length setting will automatically be stored in profile one.
- The trimmer can store the four most recently used settings in the order of the most recently used.
- If all four profile locations have a setting stored and you make a new cutting length adjustment, the oldest profile will be deleted, and the new setting will be stored.
- To recall a profile, ensure that the trimmer is stopped, tap the profiles button, use the up and down buttons to select a profile, and tap the profile button again to select that profile.
- The comb will then move to the position stored in the selected profile.
By following these steps, you can easily adjust the cutting length of the Remington MB4700 Smart Beard Trimmer to achieve your desired beard length. For more detailed instructions, please refer to the user manual provided with the product.
Add New Comment