User Manual Q&AAnswer
Feb 15, 2025 - 03:10 AM
To switch between the optical and RCA audio outputs on the , you can follow these steps:
1. Make sure the Avedio Links HDMI Audio Extractor Splitter is powered on and connected to your TV and audio system as described in the product analysis section.
2. Locate the audio output switch on the Avedio Links HDMI Audio Extractor Splitter. This switch is labeled with options such as "PASS," "2CH," and "5.1CH."
3. If you want to use the optical audio output, set the switch to the "PASS" or "5.1CH" position. This will route the audio signal to the optical output port.
4. If you want to use the RCA audio output, set the switch to the "2CH" position. This will route the audio signal to the RCA output ports.
5. Once you have selected the desired audio output, make sure your audio system is properly connected to the corresponding output port on the Avedio Links HDMI Audio Extractor Splitter.
6. Adjust the volume on your audio system as needed.
By following these steps, you should be able to switch between the optical and RCA audio outputs on the Avedio Links 4K HDMI Audio Extractor Splitter and enjoy your audio with the desired output format. For more detailed instructions, please refer to the user manual included in the package.
Add New Comment